Part 2: PAX - Setup Terminal

GalaxyPOS


PAX SP30 | S300 | MT30 | PX5 | PX7



Plug in power source.


Connect the LAN cable to the red port.


This is your start screen. Press the blue Func key and 1 at the same time.


Enter the password (default password is todays date) | mm/dd/yyyy

pax password

If the default password is not working, contact your ISO or PAX directly.



  • Press [6. Communication] 

  • Press [1. Main communication ]

  • Press [ 1. LAN ]

  • Press [ right arrow > ]

  • Press [ 2.ECR comm. Type]

  • Press [4. Ethernet]

  • Input Comm. Port [10009] and [Enter]

  • Press 1.TCP/IP

 

  • Press [1. Main communication ]

  • Press [1. LAN Parameters ]

  • Press [1. LAN Type ]

  • Press [1. DHCP ] for auto IP address
  • Press [2. Static ] for input manual IP address 

Note: Setup internet provider router.

  • Press [2. IP Address ] 

  • Input IP Address: 192.168.001.030

  • Input Subnet Mask : 255.255.255.0

  • Input Gateway : 192.168.001.001

  • Input DNS IP : 192.168.001.001

  • Check Connection [Enter]